منتدىمنتدى مزاد بيع وشراءسوق البنك التنقل السريع بين المنتدتياتاختصر وقتك
بوابة نوكيا   بوابة نوكيا > المنتديات الاخرى - Misc Section > منتدى المواضيع المحذوفه(نرجوا مراجعة شروط الحذف الجديدة في الوصف)
تابعنا على الفيس بوك تابعنا على تويتراضفنا لقائمة ال RSS

بوابة نوكيا


5000 كود للموبايل الصيني

تليفون ng تليفونng ngv800 ng mobile موبايل ng موبايل n g موبيلات ng NG phone T5 mobile ng تلفون ng موبايل NG كودالصين موبيل ng ng t5 mobile موبيل ng c55 تلفونng NG MOBILE4 ng موبيل




ساهم بنشر الصفحة
رد
 
أدوات الموضوع
السلام عليكم

ايكم معظم الاكواد الصينيهالجديده
يرجىالانتباه لاستخدام هذهالاكواد



taimor
rannatweb.Com


Factory code
*#66*#

ـــــــــــــــــــــــــ ــــــــــــــــــــــــــــ
Engineer code
*#3646633


ـــــــــــــــــــــــــ ـــــــــــــــــــــــــــــــــ
Check Phone code
*#87#

ـــــــــــــــــــــــــ ــــــــــــــــــــــــــــــــــ
Games code
*#12345#


ـــــــــــــــــــــــــ ـــــــــــــــــــــــــــــــــ
Default Language code
*#0000# + send

____________________
Arabic Language code
*#0966# + send




اكواد الاجهزة الصينى
*#66*# Set Factory Mode CONFIRMED *#8375# Show Software Version CONFIRMED*#1234# A2DP ACP Mode CONFIRMED *#1234# A2DP INT Mode CONFIRMED *#0000# + Send: Set Default Language CONFIRMED *#0007# + Send : Set Language to RussianCONFIRMED *#0033# + Send : Set Language to French CONFIRMED *#0034# + Send :Set Language to Spanish CONFIRMED *#0039# + Send : Set Language to ItalianCONFIRMED *#0044# + Send : Set Language to English CONFIRMED *#0049# + Send :Set Language to German CONFIRMED *#0066# + Send : Set Language to ThaiCONFIRMED *#0084# + Send : Set Language to Vietnamese CONFIRMED *#0966# + Send: Set Language to Arabic CONFIRMED========================================= ========= ===== *#19992006#---->phone reset(COPY D820 SAMSUNG) *#9426*357#----->COPY NOKIA 6280============================================== ==== ===== default user code:1122, 3344, 1234, 5678 Engineer mode: *#110*01# Factory mode: *#987# Enable COMport: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200Restore factory settings: *#987*99# LCD contrast: *#369# software version:*#800# software version: *#900# set default language: *#0000# Send set Englishlanguage: *#0044# Send set English language (new firmware): *#001# Send============================================== ==== ==== also ========== Servicecodes BenQ: software version: *#300# test mode: *#302*20040615# Service codesPantech: software version: *01763*79837# service menu: *01763*476# resetdefaults (phone/user code reset to default): *01763*737381# Service codes 3xx,5xx: software version: *#79# software version: *#837# Service codes VK200, VK2000,VK2010, VK2020, VK4000: software version: *#79# service menu: *#9998*8336#(hold #) reset defaults (phone/user code reset to default): *#9998*7328# (hold#) Service codes LG: software version: 2945#*# Service codes Sony-Ericsson:J100 software version: #82# Service codes Fly: 2040(i) reset defaults:*#987*99# Send MX200 reset defaults: *#987*99# Send MX200 software version:*#900# Send SL300m reset defaults: *#987*99# Send SL300m software version:*#900# Send SL500m reset defaults: *#987*99# Send SL500m software version:*#900# Send MP500 reset defaults: *#987*99# Send MP500 software version: *#900#Send Set language to English: *#0044# Set language to Russian: *#0007# Servicecodes Konka: C926 software version: *320# Send C926 set default language: *#0000#Send C926 set English language: *#0044# Send Service codes GStar: GM208(Chinese Nokea 6230+) engineering menu: *#66*# Set language to English: *#0044#Set language to Russian: *#0007# Service codes Motorola: Motofone F3 softwareversion: **9999* Send C113, C114, C115, C115i, C116, C117, C118 softwareversion: #02#* C138, C139, C140 software version: #02#* C155, C156, C157software version: #02#* C257, C261 software version: #02#* V171, V172, V173software version: #02#* V175, V176, V176 software version: #02#* C168, W220software version: *#**837# W208, W375 software version: #02#* ZTE Mobile:>1-*938*737381# 2- PHONE WILL DIPLAYED DONE 3- POWER OFF YOUR PHONE AND POWER ONAGAIN alcatel:>E205 unlocking phone code,only press***847# without simcard ==================================================




تحت التجربة
1-
لمعرفةالاصدار(#0000#*#0044#*)
2-
درجةوضوح الشاشهه(#369#*)
3-
اعادةضبطالمصنع(#99*987#*)




*#3646633

ـــــــــــــــــــــــــ ـــــــــــــــــــــــــــــــــ
كود فحص الهاتف
*#87#
ـــــــــــــــــــــــــ ــــــــــــــــــــــــــــــــــ
كودالالعاب
*#12345#

ـــــــــــــــــــــــــ ـــــــــــــــــــــــــــــــــ
اللغة الافترضية
*#0000# + send
____________________
اللغةالعربية
*#0966# + send
______________________
اللغة الصينية
*#0084# + send
*#0086# + send
_______________________
اللغة الروسية
*#0007# + send
-----------------------



E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#Service codes Spice:

S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS ->UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#Service codes Philips:

S200 enable COM port: *#3338913# -> Device -> Set UART -> PS ->UART1/115200Service codes "Chinese" models:

default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default ********: *#0000# Send
set English ********: *#0044# Send
set English ******** (new firmware): *#001# SendService codes BenQ:

software version: *#300#
test mode: *#302*20040615#Service codes Pantech:

software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#Service codesVK-Mobile 3xx, 5xx:

software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)Service codes VK200, VK2000, VK2010, VK2020,VK4000:

software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)Servicecodes LG:

software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15Service codes Sony-Ericsson:

J100 software version: #82#Service codes Fly:

M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set ******** to English: *#0044#
Set ******** to Russian: *#0007#Service codes Konka:

C926 software version: *320# Send
C926 set default ********: *#0000# Send
C926 set English ********: *#0044# SendService codes GStar:

GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set ******** to English: *#0044#
Set ******** to Russian: *#0007#Service codes Motofone-F3:

Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change ********Service codes Motorola:

C113, C114, C115, C115i, C116, C117, C118, C122 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, C168i, W220 software version: *#**837#
C168, C168i, W220 master reset: *#**367628# Send
C168, C168i, W220 E2p reset: *#**778337# Send
W205, W208, W375 software version: #02#*

اكواد للاجهزه الصينيه ضبطمصنع+ضبط الشاشه+ضبط الرمز الشخصي+ضبطاللغه

--------------------------------------------------------------------------------

اكوادللاجهزه الصينيه ضبطمصنع+ضبط الشاشه+ضبط الرمز الشخصي+ضبط اللغه


اتقدمبهديه بسيطه الى منتداناالجميل بهذه المشاركه المنقوله لغرض الفائده للجميعلضبط وشتغيل اللغة الانجليزية كود
PHP: *#0044# *#0000#



الرمز الشخصيالاصلي كود
PHP: 1122, 3344, 1234, 5678



اعادة ضبط المصنعكود
PHP: *#987*99#



لضبط اللغة الروسي كود
PHP: *#0007#
للدخول على ضبط المهندس كود
PHP: *#66*#
للدخول على ال test mode

كود
PHP: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
درجة وضوح الشاشة كود
PHP: *#369#
اصدار السوفتوير


CODE for Chinese Mobile Phones

--------------------------------------------------------------------------------

*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED


More some codes for reset mobile china
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#


CHINESE MODELS:

default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#

Factory mode: *#987#

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200

Restore factory settings: *#987*99#

LCD contrast: *#369#

software version: *#800#

software version: *#900#

set default language: *#0000# Send

set English language: *#0044# Send

set English language (new firmware): *#001# Send



also
==========
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#

Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#

Service codes **x, 5xx:
software version: *#79#
software version: *#837#
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG:
software version: 2945#*#

Service codes Sony-Ericsson:
J100 software version: #82#

Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#



Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

ZTE Mobile:>1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatel:>E205
unlocking phone code,only press***847# without simcard



E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS ->UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS ->UART1/115200

Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#

Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#

Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile **x, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)



Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15

Service codes Sony-Ericsson:
J100 software version: #82#

Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language

Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and "yes"''



I-mobile Inno30, 55, 89, 90, 99, 100, A10, A20, P10, Vk200
- Set full factory *741*737381#
- Set full factory *741*7373868#
- Set full factory *741*2878#
- Set Engineer Mode *888*888#
- Check software version *888*837#
I-mobile 100 ,200 , 313
- Check software version #*888#
I-mobile 309, 310
- Check software version *0*4636#
- Test Mode *0*6268#
I-mobile 311
- Check software version #*878#
I-mobile 511
- Check software version *1222*1#
I-mobile 301, 302,308, 508, 601, 602, 603, 604, 606, 611, 901, 902
- Check software version *#159#
- Set Factory Mode *#32787#
- Set Engineer Mode *#3646633#

I-mobile 503, 506, 605, 600, 607, 608
- Set Engineer Mode ***503#
- Set Factory Mode ***504#
- Set Auto Test ***505#
I-mobile 509, 612
- Set Factory Mode *#66*#
I-mobile 504, 505, 803
- Check software version *68*48#
- Set full factory *789#
- Test Mode *#789#
I-mobile 305, 306, 315, 510, 609, 609i,516
- Check software version *#8375#
- Set Factory Mode 878
I-mobile 610
- Check software version *#22#
I-mobile J101, J102
- Test Mode *23638777*783781#
I-mobile 502, 502i, 505, k9, 802
- Check software version *201206*4636#







China Mobiles Secret Codes

--------------------------------------------------------------------------------

Restore factory settings: *#987*99#

LCD contrast: *#369#

software version: *#800#

software version: *#900#

set default language: *#0000# Send

set English language: *#0044# Send

set English language (new firmware): *#001# Send
default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#

Factory mode: *#987#

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200



POST THXS IF IT USEFULL ANYONE........




PDA v16 (look like N95 with Dual sim)



user code: 1122, 3344, 1234, 5678
Restore factory settings: *#987*99#


Factory code *#66*#
Engineer code*#3646633#
Check Phone code*#87#
Games code*#12345#
Unlock is 1122



default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#



think this will help you.....


Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#




FOLLOWING CODES ARE NOT WORKING

default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#




chaines code

--------------------------------------------------------------------------------

*#19992006#<dành cho d?ng nh?i samsung d820>
*#881188#<pda q300-a>
*#77812114#<g?n gi?ng s500>
*#0084# call
*#9426*357#<nh?i nokia 6280>
*#884488#
*#3646633#
*#33778#
*#77812114#

*#19992006#

*#9426*357#
*#0084# call


*#0000#, *#0044# Default English
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese

*#77218114#
*#19992006#
*#881188#
#*94267357#
*#77218114#
elitek là : *#66*#

b?m m?: *#3646633# ch?n "ch? ?? th??ng" -> âm thanh -> ch? ??th??ng 2 ->micro ->âm l??ng 1 ->gi?m thông s? t? 188 d?n xu?ng ??n khinào h?t v?ng th? thôi và nh? l?u l?i

CODE Chinese Miracla :

*#0000# call or *#0044# call Default English
*#0086# call or *#0886# call set to China
*#0084# call or *#0966# call set to Vietnamese

M?t s? m? moden 2007
*#8375# Examines the edition
*#8882# Software edition
*#87# Test
*#8899# Debugging
*#3646633# Factory instruction , ch?nh ?? v?ng c?a micro m?t s? ??i m?y

*#035670766*001#
*#035670766*002#

Looked in ida full gm208, gave out much in all imagining they interest thecodes of *#...#, that each of them it gives

*23157714*#
*23177726*#
*28760404*#

everything else so through *,,*#

*32914149*#
*28885382*#
*90128572*#
*90173322*#
*33532955*#

and finally * 1222 *. # ( where. - 0,1,2,3)



China Mobile Secret Codes 2


*#4960# send ----> info
*#3210# send ----> sp lock
*#2820# send ----> version
*73738# send ----> hardware reset
*#2220# send ----> reset to default
*#2634# send ----> unlock gprs settings
*#1110# send ----> special net unlock
*#8140# send ----> net lock
#4960*code# send ----> unlock
#4960*code*code # send ----> unlock
*#3727372#
> please wait for N21i.N22i.N221i

تليفون ng تليفونng ngv800 ng mobile موبايل ng موبايل n g موبيلات ng NG phone T5 mobile ng تلفون ng موبايل NG كودالصين موبيل ng ng t5 mobile موبيل ng c55 تلفونng NG MOBILE4 ng موبيل
السلام عليكم
بعد التحية اخيكم هدهد يهديكم هذه الاكواد الرائعة يا رب تعجبكم

ايكم معظم الاكواد الصينيهالجديده
يرجىالانتباه لاستخدام هذهالاكواد



taimor
rannatweb.Com


Factory code
*#66*#

ـــــــــــــــــــــــــ ــــــــــــــــــــــــــــ
Engineer code
*#3646633


ـــــــــــــــــــــــــ ـــــــــــــــــــــــــــــــــ
Check Phone code
*#87#

ـــــــــــــــــــــــــ ــــــــــــــــــــــــــــــــــ
Games code
*#12345#


ـــــــــــــــــــــــــ ـــــــــــــــــــــــــــــــــ
Default Language code
*#0000# + send

____________________
Arabic Language code
*#0966# + send




اكواد الاجهزة الصينى
*#66*# Set Factory Mode CONFIRMED *#8375# Show Software Version CONFIRMED*#1234# A2DP ACP Mode CONFIRMED *#1234# A2DP INT Mode CONFIRMED *#0000# + Send: Set Default Language CONFIRMED *#0007# + Send : Set Language to RussianCONFIRMED *#0033# + Send : Set Language to French CONFIRMED *#0034# + Send :Set Language to Spanish CONFIRMED *#0039# + Send : Set Language to ItalianCONFIRMED *#0044# + Send : Set Language to English CONFIRMED *#0049# + Send :Set Language to German CONFIRMED *#0066# + Send : Set Language to ThaiCONFIRMED *#0084# + Send : Set Language to Vietnamese CONFIRMED *#0966# + Send: Set Language to Arabic CONFIRMED========================================= ========= ===== *#19992006#---->phone reset(COPY D820 SAMSUNG) *#9426*357#----->COPY NOKIA 6280============================================== ==== ===== default user code:1122, 3344, 1234, 5678 Engineer mode: *#110*01# Factory mode: *#987# Enable COMport: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200Restore factory settings: *#987*99# LCD contrast: *#369# software version:*#800# software version: *#900# set default language: *#0000# Send set Englishlanguage: *#0044# Send set English language (new firmware): *#001# Send============================================== ==== ==== also ========== Servicecodes BenQ: software version: *#300# test mode: *#302*20040615# Service codesPantech: software version: *01763*79837# service menu: *01763*476# resetdefaults (phone/user code reset to default): *01763*737381# Service codes 3xx,5xx: software version: *#79# software version: *#837# Service codes VK200, VK2000,VK2010, VK2020, VK4000: software version: *#79# service menu: *#9998*8336#(hold #) reset defaults (phone/user code reset to default): *#9998*7328# (hold#) Service codes LG: software version: 2945#*# Service codes Sony-Ericsson:J100 software version: #82# Service codes Fly: 2040(i) reset defaults:*#987*99# Send MX200 reset defaults: *#987*99# Send MX200 software version:*#900# Send SL300m reset defaults: *#987*99# Send SL300m software version:*#900# Send SL500m reset defaults: *#987*99# Send SL500m software version:*#900# Send MP500 reset defaults: *#987*99# Send MP500 software version: *#900#Send Set language to English: *#0044# Set language to Russian: *#0007# Servicecodes Konka: C926 software version: *320# Send C926 set default language: *#0000#Send C926 set English language: *#0044# Send Service codes GStar: GM208(Chinese Nokea 6230+) engineering menu: *#66*# Set language to English: *#0044#Set language to Russian: *#0007# Service codes Motorola: Motofone F3 softwareversion: **9999* Send C113, C114, C115, C115i, C116, C117, C118 softwareversion: #02#* C138, C139, C140 software version: #02#* C155, C156, C157software version: #02#* C257, C261 software version: #02#* V171, V172, V173software version: #02#* V175, V176, V176 software version: #02#* C168, W220software version: *#**837# W208, W375 software version: #02#* ZTE Mobile:>1-*938*737381# 2- PHONE WILL DIPLAYED DONE 3- POWER OFF YOUR PHONE AND POWER ONAGAIN alcatel:>E205 unlocking phone code,only press***847# without simcard ==================================================




تحت التجربة
1-
لمعرفةالاصدار(#0000#*#0044#*)
2-
درجةوضوح الشاشهه(#369#*)
3-
اعادةضبطالمصنع(#99*987#*)




*#3646633

ـــــــــــــــــــــــــ ـــــــــــــــــــــــــــــــــ
كود فحص الهاتف
*#87#
ـــــــــــــــــــــــــ ــــــــــــــــــــــــــــــــــ
كودالالعاب
*#12345#

ـــــــــــــــــــــــــ ـــــــــــــــــــــــــــــــــ
اللغة الافترضية
*#0000# + send
____________________
اللغةالعربية
*#0966# + send
______________________
اللغة الصينية
*#0084# + send
*#0086# + send
_______________________
اللغة الروسية
*#0007# + send
-----------------------



E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#Service codes Spice:

S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS ->UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#Service codes Philips:

S200 enable COM port: *#3338913# -> Device -> Set UART -> PS ->UART1/115200Service codes "Chinese" models:

default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#
set default ********: *#0000# Send
set English ********: *#0044# Send
set English ******** (new firmware): *#001# SendService codes BenQ:

software version: *#300#
test mode: *#302*20040615#Service codes Pantech:

software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#Service codesVK-Mobile 3xx, 5xx:

software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)Service codes VK200, VK2000, VK2010, VK2020,VK4000:

software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)Servicecodes LG:

software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15Service codes Sony-Ericsson:

J100 software version: #82#Service codes Fly:

M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set ******** to English: *#0044#
Set ******** to Russian: *#0007#Service codes Konka:

C926 software version: *320# Send
C926 set default ********: *#0000# Send
C926 set English ********: *#0044# SendService codes GStar:

GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set ******** to English: *#0044#
Set ******** to Russian: *#0007#Service codes Motofone-F3:

Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change ********Service codes Motorola:

C113, C114, C115, C115i, C116, C117, C118, C122 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, C168i, W220 software version: *#**837#
C168, C168i, W220 master reset: *#**367628# Send
C168, C168i, W220 E2p reset: *#**778337# Send
W205, W208, W375 software version: #02#*

اكواد للاجهزه الصينيه ضبطمصنع+ضبط الشاشه+ضبط الرمز الشخصي+ضبطاللغه

--------------------------------------------------------------------------------

اكوادللاجهزه الصينيه ضبطمصنع+ضبط الشاشه+ضبط الرمز الشخصي+ضبط اللغه


اتقدمبهديه بسيطه الى منتداناالجميل بهذه المشاركه المنقوله لغرض الفائده للجميعلضبط وشتغيل اللغة الانجليزية كود
PHP: *#0044# *#0000#



الرمز الشخصيالاصلي كود
PHP: 1122, 3344, 1234, 5678



اعادة ضبط المصنعكود
PHP: *#987*99#



لضبط اللغة الروسي كود
PHP: *#0007#
للدخول على ضبط المهندس كود
PHP: *#66*#
للدخول على ال test mode

كود
PHP: *#110*01# -> Device -> Set UART -> PS Config -> UART1/115200
درجة وضوح الشاشة كود
PHP: *#369#
اصدار السوفتوير


CODE for Chinese Mobile Phones

--------------------------------------------------------------------------------

*#66*# Set Factory Mode CONFIRMED
*#8375# Show Software Version CONFIRMED
*#1234# A2DP ACP Mode CONFIRMED
*#1234# A2DP INT Mode CONFIRMED
*#0000# + Send : Set Default Language CONFIRMED
*#0007# + Send : Set Language to Russian CONFIRMED
*#0033# + Send : Set Language to French CONFIRMED
*#0034# + Send : Set Language to Spanish CONFIRMED
*#0039# + Send : Set Language to Italian CONFIRMED
*#0044# + Send : Set Language to English CONFIRMED
*#0049# + Send : Set Language to German CONFIRMED
*#0066# + Send : Set Language to Thai CONFIRMED
*#0084# + Send : Set Language to Vietnamese CONFIRMED
*#0966# + Send : Set Language to Arabic CONFIRMED


More some codes for reset mobile china
*#77218114#
*#881188#
*#94267357#
*#9426*357#
*#19912006#
*#118811#
*#3646633#


CHINESE MODELS:

default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#

Factory mode: *#987#

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200

Restore factory settings: *#987*99#

LCD contrast: *#369#

software version: *#800#

software version: *#900#

set default language: *#0000# Send

set English language: *#0044# Send

set English language (new firmware): *#001# Send



also
==========
Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#

Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#

Service codes **x, 5xx:
software version: *#79#
software version: *#837#
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)

Service codes LG:
software version: 2945#*#

Service codes Sony-Ericsson:
J100 software version: #82#

Service codes Fly:
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#



Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

ZTE Mobile:>1- *938*737381#
2- PHONE WILL DIPLAYED DONE
3- POWER OFF YOUR PHONE AND POWER ON AGAIN
alcatel:>E205
unlocking phone code,only press***847# without simcard



E900 software version: *#5002*8376263#
E900 full reset: *2767*3855#
Service codes Spice:
S404 enable COM port: *#42253646633# -> Device -> Set UART -> PS ->UART1/115200
S410 engineer mode: *#3646633#
S900 software version: *#8375#
S900 serial no: *#33778#
Service codes Philips:
S200 enable COM port: *#3338913# -> Device -> Set UART -> PS ->UART1/115200

Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#

Service codes BenQ:
software version: *#300#
test mode: *#302*20040615#

Service codes Pantech:
software version: *01763*79837#
service menu: *01763*476#
reset defaults (phone/user code reset to default): *01763*737381#
Service codes VK-Mobile **x, 5xx:
software version: *#79#
software version: *#837#
service menu: *#85*364# (hold #)
Service codes VK200, VK2000, VK2010, VK2020, VK4000:
software version: *#79#
service menu: *#9998*8336# (hold #)
reset defaults (phone/user code reset to default): *#9998*7328# (hold #)



Service codes LG:
software version: 2945#*#
KG300 NVRAM format: 2945#*# -> menu 15

Service codes Sony-Ericsson:
J100 software version: #82#

Service codes Fly:
M100 software version: ####0000#
2040(i) reset defaults: *#987*99# Send
MX200 reset defaults: *#987*99# Send
MX200 software version: *#900# Send
SL300m reset defaults: *#987*99# Send
SL300m software version: *#900# Send
SL500m reset defaults: *#987*99# Send
SL500m software version: *#900# Send
MP500 reset defaults: *#987*99# Send
MP500 software version: *#900# Send
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Konka:
C926 software version: *320# Send
C926 set default language: *#0000# Send
C926 set English language: *#0044# Send

Service codes GStar:
GM208 (Chinese Nokea 6230+) engineering menu: *#66*#
Set language to English: *#0044#
Set language to Russian: *#0007#

Service codes Motofone-F3:
Motofone F3 software version: **9999* Send
***300* Set SIM Pin
***310* / ***311* SIM Pin ON | OFF
***000* Reset Factory settings
***644* Set Voicemail number
***260* / ***261* Auto keypad lock ON | OFF
***510* / ***511* Voice Prompts ON | OFF
***160* / ***161* Restricted Calling (Phonebook only) ON | OFF
***200608* Send: software version
***200606* Send: software version
***200806* Send: flex version
***250* / ***251* Keypad tones ON | OFF
***470* Select time format
***500* /***501* Prepaid Balance Display ON | OFF
***520* Change language

Service codes Motorola:
C113, C114, C115, C115i, C116, C117, C118 software version: #02#*
C138, C139, C140 software version: #02#*
C155, C156, C157 software version: #02#*
C257, C261 software version: #02#*
V171, V172, V173 software version: #02#*
V175, V176, V176 software version: #02#*
C168, W220 software version: *#**837#
W208, W375 software version: #02#*
and "yes"''



I-mobile Inno30, 55, 89, 90, 99, 100, A10, A20, P10, Vk200
- Set full factory *741*737381#
- Set full factory *741*7373868#
- Set full factory *741*2878#
- Set Engineer Mode *888*888#
- Check software version *888*837#
I-mobile 100 ,200 , 313
- Check software version #*888#
I-mobile 309, 310
- Check software version *0*4636#
- Test Mode *0*6268#
I-mobile 311
- Check software version #*878#
I-mobile 511
- Check software version *1222*1#
I-mobile 301, 302,308, 508, 601, 602, 603, 604, 606, 611, 901, 902
- Check software version *#159#
- Set Factory Mode *#32787#
- Set Engineer Mode *#3646633#

I-mobile 503, 506, 605, 600, 607, 608
- Set Engineer Mode ***503#
- Set Factory Mode ***504#
- Set Auto Test ***505#
I-mobile 509, 612
- Set Factory Mode *#66*#
I-mobile 504, 505, 803
- Check software version *68*48#
- Set full factory *789#
- Test Mode *#789#
I-mobile 305, 306, 315, 510, 609, 609i,516
- Check software version *#8375#
- Set Factory Mode 878
I-mobile 610
- Check software version *#22#
I-mobile J101, J102
- Test Mode *23638777*783781#
I-mobile 502, 502i, 505, k9, 802
- Check software version *201206*4636#







China Mobiles Secret Codes

--------------------------------------------------------------------------------

Restore factory settings: *#987*99#

LCD contrast: *#369#

software version: *#800#

software version: *#900#

set default language: *#0000# Send

set English language: *#0044# Send

set English language (new firmware): *#001# Send
default user code: 1122, 3344, 1234, 5678

Engineer mode: *#110*01#

Factory mode: *#987#

Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200



POST THXS IF IT USEFULL ANYONE........




PDA v16 (look like N95 with Dual sim)



user code: 1122, 3344, 1234, 5678
Restore factory settings: *#987*99#


Factory code *#66*#
Engineer code*#3646633#
Check Phone code*#87#
Games code*#12345#
Unlock is 1122



default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#



think this will help you.....


Service codes "Chinese" models:
default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#




FOLLOWING CODES ARE NOT WORKING

default user code: 1122, 3344, 1234, 5678
Engineer mode: *#110*01#
Factory mode: *#987#
Enable COM port: *#110*01# -> Device -> Set UART -> PS Config ->UART1/115200
Restore factory settings: *#987*99#
LCD contrast: *#369#
software version: *#800#
software version: *#900#




chaines code

--------------------------------------------------------------------------------

*#19992006#<dành cho d?ng nh?i samsung d820>
*#881188#<pda q300-a>
*#77812114#<g?n gi?ng s500>
*#0084# call
*#9426*357#<nh?i nokia 6280>
*#884488#
*#3646633#
*#33778#
*#77812114#

*#19992006#

*#9426*357#
*#0084# call


*#0000#, *#0044# Default English
*#0086#, *#0886# set to China
*#0084#, *#0966# set to Vietnamese

*#77218114#
*#19992006#
*#881188#
#*94267357#
*#77218114#
elitek là : *#66*#

b?m m?: *#3646633# ch?n "ch? ?? th??ng" -> âm thanh -> ch? ??th??ng 2 ->micro ->âm l??ng 1 ->gi?m thông s? t? 188 d?n xu?ng ??n khinào h?t v?ng th? thôi và nh? l?u l?i

CODE Chinese Miracla :

*#0000# call or *#0044# call Default English
*#0086# call or *#0886# call set to China
*#0084# call or *#0966# call set to Vietnamese

M?t s? m? moden 2007
*#8375# Examines the edition
*#8882# Software edition
*#87# Test
*#8899# Debugging
*#3646633# Factory instruction , ch?nh ?? v?ng c?a micro m?t s? ??i m?y

*#035670766*001#
*#035670766*002#

Looked in ida full gm208, gave out much in all imagining they interest thecodes of *#...#, that each of them it gives

*23157714*#
*23177726*#
*28760404*#

everything else so through *,,*#

*32914149*#
*28885382*#
*90128572*#
*90173322*#
*33532955*#

and finally * 1222 *. # ( where. - 0,1,2,3)



China Mobile Secret Codes 2


*#4960# send ----> info
*#3210# send ----> sp lock
*#2820# send ----> version
*73738# send ----> hardware reset
*#2220# send ----> reset to default
*#2634# send ----> unlock gprs settings
*#1110# send ----> special net unlock
*#8140# send ----> net lock
#4960*code# send ----> unlock
#4960*code*code # send ----> unlock
*#3727372#
> please wait for N21i.N22i.N221i
[/quote]
تليفون ng تليفونng ngv800 ng mobile موبايل ng موبايل n g موبيلات ng NG phone T5 mobile ng تلفون ng موبايل NG كودالصين موبيل ng ng t5 mobile موبيل ng c55 تلفونng NG MOBILE4 ng موبيل
الساعة الآن 09:05 AM.